10hp diesel engine driven air compressor with 200l tank

Compressed air power for job sites with no electricity

BISON BS-1.05-200 is a diesel-driven piston air compressor built for one job: delivering strong, steady compressed air wherever mains power isn’t an option. With its own 10 HP BISON diesel engine on board, it runs independently on remote construction sites, agricultural land, mines, and mobile service trucks — no generator, no extension cords, no waiting for a power hook-up.

Sized for real airflow, not just horsepower

Many buyers compare compressors on HP or tank size alone and end up with tools that stall when more than one operator is working. What actually keeps pneumatic tools running is sustained airflow. This unit delivers 1,050 L/min (≈37 CFM) at up to 12.5 bar (181 psi) — enough headroom to drive impact wrenches, chipping hammers, sandblasting guns, drills, and spray equipment, including more than one tool at the same time.

• 1,050 L/min air displacement — keeps multiple air tools supplied without pressure drops that slow your crew down.
• 12.5 bar / 181 psi working pressure — a higher pressure ceiling than many comparable units, giving you margin for demanding tools and longer hose runs.
• 200 L (53 gal) receiver tank — buffers demand spikes so the engine cycles less and air delivery stays smooth across the shift.
• On-board 10 HP BISON diesel engine — full off-grid operation for sites and applications where electric compressors simply can’t be used.

Engineered to keep running, shift after shift

The compressor pump runs at a deliberately low 900 RPM. Slower pump speed means less heat, less friction, and less wear — translating into a longer service life and fewer replacement cycles than high-revving units that wear out under continuous load. The heavy-duty cast-iron pump and steel chassis are built to take the vibration, dust, and rough handling of real worksites, and the cast-iron design is rebuildable rather than disposable, protecting your long-term cost of ownership.

Practical and safe to operate on site

• Compact 137 × 54 × 104 cm footprint and a 268.5 kg mobile frame designed to be moved around a site, loaded onto a truck, or repositioned between tasks.
• Pressure relief valve and clear, easy-to-read gauges for safe, predictable operation by any trained operator.
• Simple diesel starting and straightforward controls — minimal operator training required.

Where it earns its keep

The BS-1.05-200 suits construction and civil works, sandblasting and surface prep, well drilling and rock drilling support, agriculture and farm maintenance, tire and fleet service, and general workshop air supply — particularly any operation that moves between locations or works beyond the power grid.